Juniper JN0-201 questions and answers

The appropriate selection of training is a guarantee of success. However, the choice is very important, ITCertKing popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using ITCertKing training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends ITCertKing one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.

Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. Juniper certification JN0-201 exam is one of testing IT technology certification exams. ITCertKing is a website which provide you a training about Juniper certification JN0-201 exam related technical knowledge.

ITCertKing's Juniper JN0-201 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of ITCertKing, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.

Exam Code: JN0-201
Exam Name: Juniper (Juniper networks Certified internet associate.m(jncia-m))
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2013-10-07

On ITCertKing website you can free download part of the exam questions and answers about Juniper certification JN0-201 exam to quiz our reliability. ITCertKing's products can 100% put you onto a success away, then the pinnacle of IT is a step closer to you.

Many candidates who are ready to participate in the Juniper certification JN0-201 exam may see many websites available online to provide resources about Juniper certification JN0-201 exam. However, ITCertKing is the only website whose exam practice questions and answers are developed by a study of the leading IT experts's reference materials. The information of ITCertKing can ensure you pass your first time to participate in the Juniper certification JN0-201 exam.

If you feel that you purchase ITCertKing Juniper JN0-201 exam training materials, and use it to prepare for the exam is an adventure, then the whole of life is an adventure. Gone the furthest person is who are willing to do it and willing to take risks. Not to mention that ITCertKing Juniper JN0-201 exam training materials are many candidates proved in practice. It brings the success of each candidate is also real and effective. Dreams and hopes are important, but more important is to go to practice and prove. The ITCertKing Juniper JN0-201 exam training materials will be successful, select it, you have no reason unsuccessful !

Now IT industry is more and more competitive. Passing Juniper JN0-201 exam certification can effectively help you entrench yourself and enhance your status in this competitive IT area. In our ITCertKing you can get the related Juniper JN0-201 exam certification training tools. Our ITCertKing IT experts team will timely provide you the accurate and detailed training materials about Juniper certification JN0-201 exam. Through the learning materials and exam practice questions and answers provided by ITCertKing, we can ensure you have a successful challenge when you are the first time to participate in the Juniper certification JN0-201 exam. Above all, using ITCertKing you do not spend a lot of time and effort to prepare for the exam.

JN0-201 Free Demo Download: http://www.itcertking.com/JN0-201_exam.html

NO.1 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B

Juniper test questions   JN0-201   JN0-201

NO.2 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A

Juniper questions   JN0-201   JN0-201

NO.3 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB

Juniper   JN0-201   JN0-201   JN0-201 demo   JN0-201

NO.4 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper test   JN0-201 dumps   JN0-201 certification   JN0-201 answers real questions

NO.5 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C

Juniper   JN0-201 test questions   JN0-201   JN0-201 original questions   JN0-201 dumps

NO.6 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D

Juniper   JN0-201 answers real questions   JN0-201 braindump   JN0-201   JN0-201 certification

NO.7 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B

Juniper study guide   JN0-201   JN0-201   JN0-201

NO.8 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A

Juniper exam simulations   JN0-201   JN0-201 demo

NO.9 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A

Juniper   JN0-201 test questions   JN0-201

NO.10 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A

Juniper   JN0-201   JN0-201   JN0-201 test   JN0-201 exam

NO.11 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC

Juniper   JN0-201   JN0-201   JN0-201   JN0-201 test   JN0-201

NO.12 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B

Juniper pdf   JN0-201   JN0-201   JN0-201 dumps

NO.13 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC

Juniper questions   JN0-201   JN0-201

NO.14 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD

Juniper exam prep   JN0-201   JN0-201 exam prep   JN0-201   JN0-201

NO.15 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B

Juniper exam simulations   JN0-201 certification training   JN0-201   JN0-201 test answers

NO.16 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C

Juniper   JN0-201   JN0-201 dumps   JN0-201   JN0-201   JN0-201

NO.17 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A

Juniper   JN0-201 answers real questions   JN0-201 braindump   JN0-201 exam prep   JN0-201

NO.18 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD

Juniper   JN0-201 test questions   JN0-201

NO.19 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B

Juniper dumps   JN0-201   JN0-201   JN0-201 practice test

NO.20 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A

Juniper   JN0-201 certification   JN0-201 study guide   JN0-201   JN0-201 original questions

ITCertKing offer the latest 000-N37 exam material and high-quality HP2-N42 pdf questions & answers. Our 000-273 VCE testing engine and study guide can help you pass the real exam. High-quality LOT-405 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-201_exam.html