ITCertKing's Microsoft 70-649 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of ITCertKing, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.
Are you bothered by looking for good exam materials of Microsoft 70-649 test? Don't worry. ITCertKing can provide you with everything you need. Should your requirement, ITCertKing find an efficient method to help all candidates to pass 70-649 exam. Most candidates are preparing for IT certification exam while they working, which is a painstaking, laborious process. In order to avoid wasting too much time in preparing for the exam, ITCertKing provides you with Microsoft 70-649 dumps that can help you pass the test in the short period of time. The dumps contain all problems in the actual test. So, as long as you make use of our dumps, 70-649 certificate exam will not a problem.
ITCertKing Microsoft 70-649 practice test dumps can help you pass IT certification exam in a relaxed manner. In addition, if you first take the exam, you can use software version dumps. Because the SOFT version questions and answers completely simulate the actual exam. You can experience the feeling in the actual test in advance so that you will not feel anxious in the real exam. After you use the SOFT version, you can take your exam in a relaxed attitude which is beneficial to play your normal level.
Exam Code: 70-649
Exam Name: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)
One year free update, No help, Full refund!
Total Q&A: 278 Questions and Answers
Last Update: 2014-02-20
Now passing Microsoft certification 70-649 exam is not easy, so choosing a good training tool is a guarantee of success. ITCertKing will be the first time to provide you with exam information and exam practice questions and answers to let you be fully prepared to ensure 100% to pass Microsoft certification 70-649 exam. ITCertKing can not only allow you for the first time to participate in the Microsoft certification 70-649 exam to pass it successfully, but also help you save a lot of valuable time.
70-649 Free Demo Download: http://www.itcertking.com/70-649_exam.html
NO.1 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B
Microsoft 70-649 70-649 certification training 70-649 70-649
NO.2 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B
Microsoft 70-649 70-649 70-649 70-649 test answers
NO.3 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B
Microsoft study guide 70-649 70-649 answers real questions 70-649 certification 70-649 study guide
NO.4 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B
Microsoft 70-649 70-649 exam simulations 70-649 70-649
NO.5 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC
Microsoft 70-649 answers real questions 70-649 original questions 70-649 70-649 70-649 test answers
NO.6 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C
Microsoft 70-649 certification 70-649 answers real questions 70-649
NO.7 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C
Microsoft practice test 70-649 test 70-649 70-649 original questions 70-649 exam simulations
NO.8 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B
Microsoft 70-649 70-649 dumps
NO.9 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B
Microsoft exam simulations 70-649 70-649 exam dumps
NO.10 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B
Microsoft answers real questions 70-649 questions 70-649 70-649 study guide
NO.11 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A
Microsoft 70-649 certification 70-649 70-649 test questions 70-649 exam dumps 70-649 certification
NO.12 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C
Microsoft test answers 70-649 70-649 70-649 exam prep
NO.13 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D
Microsoft answers real questions 70-649 test questions 70-649 practice test 70-649 exam dumps 70-649 certification training
NO.14 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D
Microsoft dumps 70-649 70-649
NO.15 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C
Microsoft questions 70-649 original questions 70-649 70-649
NO.16 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C
Microsoft 70-649 70-649 70-649
NO.17 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C
Microsoft 70-649 test questions 70-649 exam dumps 70-649 test questions
NO.18 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A
Microsoft 70-649 70-649 test 70-649 70-649
NO.19 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C
Microsoft demo 70-649 questions 70-649
NO.20 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B
Microsoft dumps 70-649 70-649 answers real questions
ITCertKing offer the latest 000-198 exam material and high-quality C4120-783 pdf questions & answers. Our C_TPLM30_66 VCE testing engine and C-HANATEC131 study guide can help you pass the real exam. High-quality 400-051 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/70-649_exam.html
没有评论:
发表评论