EMC certification E22-275 exam training materials

The E22-275 examination certification, as other world-renowned certification, will get international recognition and acceptance. People around the world prefer E22-275 exam certification to make their careers more strengthened and successful. In ITCertKing, you can choose the products which are suitable for your learning ability to learn.

Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. ITCertKing's EMC E22-275 exam training materials are the best training materials for this exam. With it you will have a key to success. ITCertKing's EMC E22-275 exam training materials are absolutely reliable materials. You should believe that you can pass the exam easily , too.

ITCertKing can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. ITCertKing has good reliability and a high reputation in the IT professionals. You can free download the part of EMC E22-275 exam questions and answers ITCertKing provide as an attempt to determine the reliability of our products. I believe you will be very satisfied of our products. I have confidence in our ITCertKing products that soon ITCertKing's exam questions and answers about EMC E22-275 will be your choice and you will pass EMC certification E22-275 exam successfully. It is wise to choose our ITCertKing and ITCertKing will prove to be the most satisfied product you want.

Exam Code: E22-275
Exam Name: EMC (recoverpoint backup and recovery specialist exam )
One year free update, No help, Full refund!
Total Q&A: 126 Questions and Answers
Last Update: 2013-12-10

How to get to heaven? Shortcart is only one. Which is using ITCertKing's EMC E22-275 exam training materials. This is the advice to every IT candidate, and hope you can reach your dream of paradise.

E22-275 Free Demo Download: http://www.itcertking.com/E22-275_exam.html

NO.1 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A

EMC practice test   E22-275   E22-275 exam prep   E22-275   E22-275

NO.2 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A

EMC   E22-275   E22-275   E22-275   E22-275

NO.3 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B

EMC questions   E22-275   E22-275   E22-275

NO.4 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D

EMC questions   E22-275 exam dumps   E22-275   E22-275 braindump

NO.5 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A

EMC   E22-275 questions   E22-275   E22-275 pdf   E22-275

NO.6 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B

EMC braindump   E22-275 test   E22-275   E22-275   E22-275   E22-275 test

NO.7 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A

EMC demo   E22-275   E22-275 exam   E22-275 dumps

NO.8 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A

EMC certification training   E22-275   E22-275   E22-275 exam simulations   E22-275

NO.9 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A

EMC braindump   E22-275   E22-275   E22-275 exam simulations   E22-275 practice test

NO.10 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A

EMC study guide   E22-275 exam simulations   E22-275 original questions   E22-275 test

NO.11 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A

EMC   E22-275   E22-275 questions   E22-275 original questions   E22-275 test   E22-275

NO.12 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A

EMC answers real questions   E22-275   E22-275 exam prep

NO.13 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D

EMC   E22-275 test questions   E22-275   E22-275

NO.14 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A

EMC   E22-275   E22-275

NO.15 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A

EMC   E22-275   E22-275   E22-275   E22-275 study guide   E22-275 answers real questions

NO.16 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A

EMC   E22-275 answers real questions   E22-275 test answers   E22-275 exam simulations

NO.17 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A

EMC   E22-275 exam   E22-275 exam prep

NO.18 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A

EMC test questions   E22-275   E22-275   E22-275

NO.19 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A

EMC exam prep   E22-275   E22-275   E22-275   E22-275 practice test

NO.20 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A

EMC original questions   E22-275   E22-275 exam   E22-275

ITCertKing offer the latest IIA-CIA-Part2 exam material and high-quality MSC-321 pdf questions & answers. Our 000-120 VCE testing engine and C-TSCM62-65 study guide can help you pass the real exam. High-quality 000-783 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E22-275_exam.html