SAP C-TSCM42-64 questions and answers

Many ambitious IT professionals want to make further improvements in the IT industry and be closer from the IT peak. They would choose this difficult SAP certification C-TSCM42-64 exam to get certification and gain recognition in IT area. SAP C-TSCM42-64 is very difficult and passing rate is relatively low. But enrolling in the SAP certification C-TSCM42-64 exam is a wise choice, because in today's competitive IT industry, we should constantly upgrade ourselves. However, you can choose many ways to help you pass the exam.

ITCertKing SAP C-TSCM42-64 exam training materials can help you to come true your dreams. Because it contains all the questions of SAP C-TSCM42-64 examination. With ITCertKing, you could throw yourself into the exam preparation completely. With high quality training materials by ITCertKing provided, you will certainly pass the exam. ITCertKing can give you a brighter future.

ITCertKing's SAP certification C-TSCM42-64 exam testing exercises is very similar with real exam questions. If you choose ITCertKing's testing practice questions and answers, we will provide you with a year of free online update service. ITCertKing can 100% guarantee you to pass the exam, if you fail to pass the exam, we will full refund to you.

Exam Code: C-TSCM42-64
Exam Name: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
One year free update, No help, Full refund!
Total Q&A: 80 Questions and Answers
Last Update: 2013-11-20

ITCertKing SAP C-TSCM42-64 exam materials contain the complete unrestricted dump. So with it you can easily pass the exam. ITCertKing SAP C-TSCM42-64 exam training materials is a good guidance. It is the best training materials. You can use the questions and answers of ITCertKing SAP C-TSCM42-64 exam training materials to pass the exam.

Our ITCertKing is a professional website to provide accurate exam material for a variety of IT certification exams. And ITCertKing can help many IT professionals enhance their career goals. The strength of our the IT elite team will make you feel incredible. You can try to free download part of the exam questions and answers about SAP certification C-TSCM42-64 exam to measure the reliability of our ITCertKing.

C-TSCM42-64 Free Demo Download: http://www.itcertking.com/C-TSCM42-64_exam.html

NO.1 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B

SAP test   C-TSCM42-64   C-TSCM42-64

NO.2 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A

SAP study guide   C-TSCM42-64 demo   C-TSCM42-64   C-TSCM42-64 exam dumps   C-TSCM42-64

NO.3 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B

SAP questions   C-TSCM42-64   C-TSCM42-64   C-TSCM42-64   C-TSCM42-64

NO.4 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C

SAP pdf   C-TSCM42-64 practice test   C-TSCM42-64

NO.5 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D

SAP   C-TSCM42-64   C-TSCM42-64 demo   C-TSCM42-64   C-TSCM42-64

NO.6 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B

SAP   C-TSCM42-64 original questions   C-TSCM42-64

NO.7 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E

SAP   C-TSCM42-64   C-TSCM42-64 exam prep   C-TSCM42-64 certification   C-TSCM42-64

NO.8 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B

SAP test   C-TSCM42-64   C-TSCM42-64 certification training   C-TSCM42-64

NO.9 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D

SAP original questions   C-TSCM42-64   C-TSCM42-64   C-TSCM42-64

NO.10 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C

SAP   C-TSCM42-64 answers real questions   C-TSCM42-64 pdf

ITCertKing offer the latest 700-410 exam material and high-quality HP2-H28 pdf questions & answers. Our 000-303 VCE testing engine and HP2-N43 study guide can help you pass the real exam. High-quality 000-276 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/C-TSCM42-64_exam.html