CompTIA certification PD1-001 exam targeted training

Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the CompTIA PD1-001 exam, it is necessary to pass it. If you are concerned about the test, however, you can choose ITCertKing's CompTIA PD1-001 exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.

If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing CompTIA certification PD1-001 exam, and at the same time do not know how to choose a more effective shortcut to pass CompTIA certification PD1-001 exam. Now ITCertKing provide you a effective method to pass CompTIA certification PD1-001 exam. It will play a multiplier effect to help you pass the exam.

Exam Code: PD1-001
Exam Name: CompTIA (CompTIA PDI+ Beta Exam)
One year free update, No help, Full refund!
Total Q&A: 861 Questions and Answers
Last Update: 2014-01-04

Many people think that passing some difficult IT certification exams needs to be proficient in much of IT expertise and only these IT personnels who grasp the comprehensive IT knowledge would be able to enroll in the exam. In fact, there are many ways to help you make up for your lack of knowledge, and pass the IT certification exams in the same. Perhaps you would spend less time and effort than the people who grasp fairly comprehensive expertise. The saying goes, all roads lead to Rome.

In this era, everything is on the rise. Do not you want to break you own? Double your salary, which is not impossible. Through the CompTIA PD1-001 exam, you will get what you want. ITCertKing will provide you with the best training materials, and make you pass the exam and get the certification. It's a marvel that the pass rate can achieve 100%. This is indeed true, no doubt, do not consider, act now.

PD1-001 Free Demo Download: http://www.itcertking.com/PD1-001_exam.html

NO.1 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE

CompTIA   PD1-001   PD1-001   PD1-001

NO.2 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B

CompTIA exam prep   PD1-001 practice test   PD1-001

NO.3 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D

CompTIA   PD1-001 braindump   PD1-001   PD1-001 certification

NO.4 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A

CompTIA certification training   PD1-001   PD1-001 exam   PD1-001   PD1-001 original questions

NO.5 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A

CompTIA pdf   PD1-001   PD1-001 certification

NO.6 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D

CompTIA exam prep   PD1-001 demo   PD1-001   PD1-001

NO.7 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B

CompTIA   PD1-001   PD1-001 test questions

NO.8 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D

CompTIA   PD1-001 braindump   PD1-001   PD1-001   PD1-001 test answers   PD1-001 pdf

NO.9 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C

CompTIA study guide   PD1-001   PD1-001

NO.10 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A

CompTIA   PD1-001 answers real questions   PD1-001 questions   PD1-001   PD1-001 dumps   PD1-001 answers real questions

NO.11 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A

CompTIA   PD1-001 test answers   PD1-001 test   PD1-001 original questions   PD1-001 exam

NO.12 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C

CompTIA   PD1-001 test answers   PD1-001   PD1-001   PD1-001 practice test

NO.13 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A

CompTIA test questions   PD1-001 test   PD1-001 certification training

NO.14 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B

CompTIA certification training   PD1-001   PD1-001

NO.15 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B

CompTIA test answers   PD1-001   PD1-001   PD1-001 certification   PD1-001 practice test   PD1-001

NO.16 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B

CompTIA study guide   PD1-001   PD1-001

NO.17 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D

CompTIA study guide   PD1-001   PD1-001 dumps   PD1-001

NO.18 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A

CompTIA exam   PD1-001 exam prep   PD1-001   PD1-001

NO.19 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C

CompTIA   PD1-001   PD1-001

NO.20 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D

CompTIA   PD1-001   PD1-001   PD1-001   PD1-001 demo   PD1-001 test questions

ITCertKing offer the latest 700-101 exam material and high-quality EN0-001 pdf questions & answers. Our 000-318 VCE testing engine and HP2-B104 study guide can help you pass the real exam. High-quality C_TADM51_70 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/PD1-001_exam.html